Infrastructure
Low-Voltage & Cable Management
Low-voltage pathway and termination work: J-hooks, raceway, riser runs, and floor boxes. Every end is labelled at both terminations and captured in a handover document, so the next technician does not start from zero.
- Scopes it runs at
- 3
- Steps in a job
- 4
- Deliverables
- 5
- Estimate
- $0
Scope
What this looks like at your scale
Cable is the part of an installation nobody sees and everybody inherits. A run that was pulled quickly and labelled never is a run that costs an hour of tracing every time something moves, and a closet with no documentation is one where the safe move is always to change nothing. The work is cheap to do properly on the day and expensive to correct afterwards, which is exactly the shape of problem that gets deferred.
- 01
A handful of drops
Adding positions to an existing floor, or running to a new camera, access point or printer. Half a day to a day.
- 02
A floor fit-out
Fifty to three hundred drops with a patch field, pathway, and a labelling scheme applied from the first run rather than retrofitted at the end.
- 03
A backbone or a closet rebuild
Riser and inter-closet links, fibre where the distance calls for it, and an existing closet dressed and documented back into a state somebody can work in.
How it runs
In the order the work happens
The sequence matters more than the list. Most of what goes wrong on these jobs traces back to a step skipped early rather than to the work itself.
- 01
Walk the pathway first
Where the cable can legally and physically go, what the ceiling is, whether the space is a plenum, and what it shares a tray with. Plenum-rated cable in a return-air space is code, not preference, and it is not a thing to discover after the pull.
- 02
Pull to standard, not to the shortest line
Bend radius respected, separation kept from fluorescent ballasts and power, lengths inside the channel limit. Most certification failures are decided during the pull rather than at the termination.
- 03
Terminate, label, and test
Terminations to T568A or B — consistently, whichever the building already uses — labelled to a scheme at both ends, and tested. Certification to a printed report where the job calls for it.
- 04
Leave a closet somebody can read
Dressed, combed, and documented: a patch schedule that matches the labels, and a photograph of the finished field. The test is whether a stranger can trace a port without a toner.
What you get
What is actually delivered
- Pathway design, J-hooks, and raceway
- Riser and floor box runs
- Dual-end labelling scheme
- Termination and continuity testing
- As-built documentation at handover
Not this
What we do not do here
Stating this is what makes the rest of the page worth believing, and it saves you a call that was never going to end in work.
- Line-voltage electrical work. Anything on the mains side is a licensed electrician's job in New York and we do not touch it.
- Core drilling and firestopping through rated assemblies, which we coordinate rather than perform.
- Asbestos or anything else in a ceiling that needs abatement — we stop and tell you.
Questions
Before you call
- Cat6 or Cat6A?
- Cat6 is fine for gigabit at normal floor distances. Cat6A is worth it where you are running multi-gig now, powering high-draw PoE devices over long runs, or you would rather not repull in five years. We will say which applies to your building rather than defaulting to the more expensive one.
- Do you certify the runs?
- On request, with a printed report per drop. A wire-map test proves the pins are right; certification proves the channel meets the standard, and it is what a fit-out handover usually wants.
- Can you work around our existing mess?
- Yes, and we will tell you honestly whether adding to it or rebuilding it is cheaper over the next two years. Sometimes the right answer is that a closet is beyond tidying.
Related
Usually bought alongside
- Infrastructure
Network & Telecom Infrastructure
Switching, structured cabling, and closets that a stranger can read at a glance.
- Retail & AV
Camera Systems & Surveillance
Coverage you can actually use when something happens, not just footage.
- Field Services
Office Moves & Floor Migrations
Move a floor over a weekend and open Monday like nothing happened.
Next step
Need Low-Voltage & Cable Management?
Free diagnostics and a written estimate before anyone is dispatched. Tell us the site and the deadline and we will tell you what it takes.
- Free diagnostics
- Same-day across most of the metro
- Named technicians
- No fix, no labour charge