Site Plan Designer
Import a floor plan or schematic and lay out the system on top of it. Drop cameras, recorders, switches, and access points, connect them with cable runs, and set a scale by tracing one known distance so every run measures its own length. Export the marked-up plan as an image, an SVG, or a project file — and send the cameras and their measured cable straight to the Camera System Estimator for a costed bill of materials.
- Cameras
- 0
- Cable runs
- 0
- Total cable
- — set scale
- Scale
- none
Import a floor plan or schematic, set the scale by tracing one known distance, then drop devices and connect them with cable runs — each run measures its own length. Cameras carry into the Camera System Estimator with their measured cable, so a layout becomes a bill of materials. Everything runs in your browser; the image and layout never leave this tab, and autosave keeps them here between visits.
More on the bench
- 01Switch Config AuditorPaste a running-config, get the findings.
- 02Drive Health ReaderPaste smartctl output, get a straight answer.
- 03Traceroute ReaderPaste a trace, find out whose problem it is.
- 04Subnet CalculatorCIDR in, everything else out.
- 05PoE Budget PlannerWill the switch actually carry the load?
- 06Camera Storage CalculatorHow many terabytes for how many days.
- 07Transfer Time CalculatorHow long the migration window really needs to be.
- 08Camera System EstimatorEvery part of a camera system, costed.
We'll walk the site
and mark it up for real
Anyone planning where devices go and how far the cable runs before anyone climbs a ladder.